web_banner_mix_07.jpg
web_banner_mix_06.jpg
web_banner_mix_07.jpg

dimensions


SCROLL DOWN

dimensions


 

in.mix can drive and control up to three color zones inside or outside your spa.

 
 

It really gives you the tools to create personalized atmospheres to go along with various outdoor activities.


in.mix 300 Supports 3 LED Zones

Zone 1 supports 2 types of connexions (A and B). The type A connection is made for 5 pin LEDs and the type B connection is for 4 pin LEDs. It is important to note that these 2 connections will always output the same color, since they are in the same Zone 1.

Table of correspondence between zones and connections:

  • OUT 1 connector: Zone 1

  • OUT 2 connector: Zone 1

  • OUT 3 connector: Zone 2

  • OUT 4 connector: Zone 3


Other Connections

«CO» port on the enclosure for connection to other accessories.

Connect the CO cable of the in.mix 300 to the CO connector of the spa pack. See the documentation related to your specific pack model for more details on this connection.

Connect the AC power cable of the in.mix 300 to a direct output of the spa pack. See the documentation related to your specific pack model for more details on this connection.


Compatible LED Lights

Contact Gecko Alliance to determine if the LED models you plan on using are compatible. Different options are available.

If J&J Electronics Inc.’s Spyder LEDs from their ColorCHOICE™ series are used, up to 100 light points can be supported by the in.mix-300. They may be distributed in any way through the 3 Zones.

Out 1 is compatible with the J&J cluster.

If choosing J&J Electronics, please note the in.mix 300 comes in "plug & play" version (#0609-521005) with cables included as seen here.

 
 

Other compatible LED lights

Other lights option are available for your in.mix 300.  Please note the "plug & play" version comes ONLY with J&J Electronics.

Rosstech

 

Maximum LED Quantity: 100 LEDS

Consumption: 12V

 

Rising Dragon

 

Maximum LED Quantity: 120 LEDS

Consumption: 5V

 

Sloan LED

 

Maximum LED Quantity: 120 LEDS

Consumption: 12V

 

Proway

 

Maximum LED Quantity: 120 LEDS

Consumption: 5V

 

Specs

Environmental ratings

  • Operating temperature: -4 °F (-20 °C) to 140 °F (60 °C)

  • Storage temperature: -22 °F (-30 °C) to 185 °F (85 °C)

  • Humidity: 70% max

  • Water resistance: IPX5


Mechanical

  • Weight: 1.9 lb (870 g)

  • Dimensions (W x H x D): 7.03'' x 6.13'' x 2.22''
    (179 x 156 x 56 mm)


Line input

  • Input voltage: 100-240VAC 50/60 Hz


LED outputs

  • 5 Vdc output, variable

  • 3 Independent zones

  • 4 Connectors outputs, can be assigned by low level configuration to any of the zones

  • up to 100 points of light (RGB)

  • up to 78,000 colors *

  • 2 Rainbow effects with smooth transition

  • plug and play with J&J spider and cluster lights

* With in.k1000 & in.k1000+ keypads only. in.k800 & in.k500 keypads offer a selection of 10 colors.


Other connections

  • Additional CO connector for other accessories


Compatibility

  • Compatible with X and Y series version 2 (-V2)

  • Compatible with in.k800 version 6, in.k500 version 19, in.k1000 version 13 or in.k1000+


UL & CSA certifications

  • UL1563 sixth ed.

  • UL file: E182156

  • CSA No. 22.2 - 218.1 - M89


European certifications

  • EN/IEC60335-1: 2010/A1: 2013

  • EN/IEC60335-2: 60/A2: 2008

  • CSA No. 22.2 - 218.1 - M89


CEM Europe

  • EN 55014-1

  • EN 55014-2

  • EN 61000-3-2

  • EN 61000-3-3


 
web_banner_mix_06.jpg

manual


manual


 

in.mix can drive and control up to 3 color zones inside or outside your spa.

Web_couvert_mix_Manual.jpg
 
 

It really gives you the tools to create personalized atmospheres to go along with various outdoor activities.